Digital Wall Clocks

Our Digital Wall Clocks cover a wide variety of requirements for accurate and easy to read displays. They are highly accurate electronic clocks with 100% solid state circuitry, no moving parts to wear out. The Time is shown on a 4 Inch Red LED display (Seconds Characters are 2.3 inches). The clock is enclosed in a high impact ABS plastic housing. The Clocks are surface mounted on a single or double gang outlet box. For use in hallways, a Double Dial Hanger Bracket is available. The display is visible from distances exceeding 100 feet.  The clock timing is line synchronous for long term accuracy. An Internal Time Base continues to maintain the correct time during periods of power failure.

Features:

  • Four or Six Digit Red 4 inch LED Display
  • Compatible with WIC Systems
  • Line Synchronous Timing - 60 Hz
  • Wired Synchronous Secondary
  • Battery Back Up for time keeping
  • Manual Time Set Buttons
  • 12 or 24 Hour Display
  • Mating Connector Supplied
  • 115 VAC Power

Optional Features:

  • Rechargeable NiCad Battery
  • Master Clock (Wired Synchronous or RS485)
  • Six Digits (Hours, Minutes, Seconds)
  • 220 VAC Power
  • One Circuit Bell Scheduler
  • Six foot Line Cord

Specification:

  • Operating Power: 15 VAC 60 HZ 5 VA (24 & 230 VAC and 50 HZ Available)
  • Weight: approx. 3 Lbs.
  • Battery Reserve: (Alkaline) - Approx. 20 Hours, (NiCad) - Approx. 5 Hours
digital-clocks.jpg